How to use Stacks for Managing MacOS Mojave Desktop?

How to use Stacks for Managing MacOS Mojave Desktop?

In case you’re somebody that has a ton of documents on your work area, you will love the new Stacks include in macOS Mojave, which is intended to sort out the majority of your records into flawless little heaps on your work area, disposing of messiness.


Lamentably, Stacks is a choice that is restricted to the work area and not accessible inside individual record envelopes.


Empowering and Disabling Stacks


Flipping Stacks on and off is finished with only two or three ticks on the work area. At the point when at the work area, right snap to raise the work area alternatives menu, and afterward pick the “Stacks” choice.


You can likewise utilize the Finder to empower Stacks.

1. Open a Finder window.

2. In the menu bar at the highest point of the Mac, go to View.

3. Check the “Utilization Stacks” choice.


Turning on Stacks will consequently sort out your documents by record type. A portion of the accessible Stacks incorporate records, pictures, PDF archives, spreadsheets, other, and screen captures.

On the off chance that you need to turn Stacks off and return to a full perspective of the considerable number of documents on the work area, right snap again and uncheck the Stacks choice. Then again, switch the Finder steps.


Survey Files in a Stack


In the event that you need to see the majority of the records that are contained inside a Stack, simply snap, and it will grow the Stack and put a little bolt on the Stack’s name with the goal that you realize which Stack you’re seeing.

With the Stack extended, on the off chance that you tap on a document, it will open up in whatever application is set to be the default application for that record type.

Whenever done, tap the Stack again to fall it down into a sorted out heap.

To open up the majority of your Stacks without a moment’s delay, choice tap on the any Stack, which will extend the majority of the work area Stacks on the double. Choice snap again on any of the open Stacks to close them all.


Redoing Stacks


Stacks are sorted out by record type naturally, however you can change the Stack authoritative framework, gathering your documents by Date Last Opened, Date Added, Date Modified, Date Created, and Tags.

1. Open Finder.

2. In the menu bar, tap on the View alternative.

3. Select the “Gathering Stacks By” alternative.

4. Pick one of the accessible alternatives to change the manner in which your Stacks are arranged.


The most dominant arranging choice in Stacks is obviously Tags, which are client set and can be utilized to distinguish particular kinds of records, for example, all reports identifying with an explicit point.

At the point when assembled by one of the date alternatives, Stacks will be recorded in augmentations of Today, Yesterday, Previous 7 Days, Previous 30 Days, and after that from that point forward, by year.


Further Stacks Options


On the off chance that you need to stick one of your Stacks into an organizer, you can do as such by right tapping on one of the Stacks and choosing the “New Folder With Selection” choice.

Utilizing a similar right snap alternatives that are accessible when a Stack is chosen, you can open the records, open them in a predetermined application, rename documents, share documents, pack records, send documents to waste, and that’s only the tip of the iceberg.

You essentially have the majority of the equivalent authoritative choices that you would have choosing any gathering of records on your work area, however without the need to choose them physically.


John Dev is working as a technical expert from a very long time. He also writes blogs for MS office, windows on many websites like


How to Fix NO SD or SD ERR on Camera’s LCDr?

How to Fix NO SD or SD ERR on Camera's LCDr?

What’s the issue?

The camera is demonstrating NO SD or SD ERR.

Where does it apply?

HERO7 Black

HERO7 Silver

HERO7 White

HERO6 Black


HERO5 Black

HERO5 Session


Legend Session + HERO4 Session


Legend (2018)

Legend (2014)





How to fix it?


In case you’re encountering either a ‘SD ERR’ or ‘NO SD’ message on your camera’s LCD screen, this implies your camera can’t appropriately speak with the SD card. Here are a few stages you can take to determine the issue:

If it’s not too much trouble note: Ensure that you back up any photos as well as recordings before you continue any further to avoid loss of film.

On the off chance that you are seeing ‘SD ERR’ or ‘SD ERROR’

Ensure that the SD card is completely embedded in the camera.

Kindly enter the Settings menu and select the waste can symbol to Delete All/Format your SD card. You can likewise organize the SD card utilizing the GoPro App or your Mac/Windows PC. This will wipe the SD card clean of all information including any potential issues that may have been causing the mistake. Leave your settings menu and the camera should come back to an ordinary showcase.

On the off chance that in the wake of playing out the investigating above, you see this mistake subsequent to recording in a high-goals or – outline rate mode, all things considered, your SD card can’t stay aware of the camera’s yield. For further approval, if you don’t mind attempt an optional card from our Recommended List for the best execution.

In the event that you are seeing ‘NO SD’

To begin with, ensure that the SD card is completely embedded in the camera. Power on the camera and confirm that “NO SD” is still shown.

On the off chance that the camera still shows “NO SD,” we’ll need to design the card utilizing the PC before having the capacity to utilize it in the camera. If you don’t mind embed the card into your PC utilizing a microSD Card peruser/connector.

Adhere to the arranging guidelines for your working framework: Windows | Mac

After finishing the card arrange in the PC, securely discharge the card, set it back into the GoPro and power it ON. In the event that a “SD ERR” message shows up please utilize the guidelines above to clear this message, generally if the presentation peruses ordinarily you’re good to go.

On the off chance that the above investigating doesn’t resolve the issues you’re seeing, there could be an issue with your SD card or an issue with the camera perceiving SD cards. On the off chance that accessible, take a stab at embeddings an auxiliary SD card in the camera to check whether it will perceive an alternate card and limit where the issue is coming from.


John Dev is working as a technical expert from a very long time. He also writes blogs for MS office, windows on many websites like